| After-sales Service: | Life Cycle Service |
|---|---|
| Warranty: | 12 Months |
| Type: | Sweep and Suck Type |
| Certification: | ISO9000, CCC |
| Transmission Type: | Manual |
| Emission Standard: | Euro 2 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
2. TECHNICAL PARAMETERS
| Truck Specification | ||
| Chassis model | CLW5160TXSF5 | |
| Cab | FAW J5K flat cab, with power steering. Electronic flameout,with a/c | |
| Driving Type | 4*2 Right hand driving | |
| Max Speed (km/h) | 90 | |
| Overall dimension(mm) | 8700*2490*3100 | |
| GVW( kg) | 12000 | |
| Mass in working order ( kg) | 16000 | |
| Wheelbase(mm) | 5340 | |
| Tire | 275/70R22.5 (6+1) | |
| Clutch | Single-plate 380mm hydraulic-Air Assisted | |
| Steering | Hydraulic steering with power assistance | |
| Gear box | 6-speed FAW CA6TBX085 | |
| Bridge | Front axle | 5500KG |
| Rear axle | 9500KG | |
| Enging | Model | FAW CA6DF2D-18 Euro2 |
| Fuel Type | Diesel fuel | |
| Type | Water-cooled four-stroke,, direct injection, turbocharged | |
| Max output power/rotate speed (hp /rpm ) | 180/2300 | |
| Max torque/rotate speed(N.m/rpm) | 650/1350-1600 | |
| Braking System | Service Brake | Full air Dual Circuit with ABS |
| Park/Emergency System | Spring brakes/Rear Booster | |
| Eletric system | 24v | |
| Upper-Body specification | ||
| Vice generator | ||
| Model | B170 | |
| Rated power (kw) | 125KW | |
| High pressure cleaning | ||
| Cleaning speed (km/h) | 3-20 | |
| Cleaning width(m) | 3.5 | |
| Cleaning pressure (mpa) | 10 | |
| Pump flow(L/MIN) | 154 | |
| Suction sweep operation | ||
| Cleaning efficiency | ≥95% | |
| The maximum diameter of the suction body(mm) | 110 | |
| Suction sweep width(mm) | 2.3-3.5 | |
| Maximum cleaning power (m3/h) | 70000 | |
| Butterfly dish brush overhang dimension(mm) | ≥400 | |
| Working speed (km/h) | 3-20 | |
| Water tank body | ||
| Rated capacity (m3) | 9 | |
| Garbage tank body | ||
| Rated capacity(m3) | 7 | |
| Discharge door opening angle | ≥50º | |
| Hydraulic system | ||
| Model | Open, electrical control | |
| The main element | Gear pumps, hydraulic motors, hydraulic cylinders, solenoid valve | |
| Pressure (mpa) | 16 | |
| Hydraulic oil tank capacity (l) | 60 | |
| Hydraulic oil temperature (ºC) | 60 | |
| Electrical system | ||
| Model | DC24V | |
| voltage | 24V | |
| Battery | 24V(2 set 12 v battery series connection ) | |
| High pressure water system | ||
| Type : | Piston pump | |
| Model | German PF36 | |
| Pressure (mpa) | 10 | |
| Ratating speed (r/min) | 1150 | |
| Valve type | Pilot pressure valve | |
| Pressure for valve (mpa) | 7 | |
| Nozzle type | High pressure cleaning | |
| Water filter | Strainer | |
| Sprinkle system | ||
| The main elements | Electric diaphragm pump, water filters, nozzles, etc. | |
| Sweeper disk device | ||
| Model | Center two sweeper disk, controlled by a hydraulic motor, front right can be independently controlled with avoidance and reset function | |
| Diameter (mm) | 850 | |
| Speed | High :110 medium: 80 ,low :50 | |
| Angel | Forward 4-6º roll 4-7º | |
| Sucker device | ||
| Model | Double suction port, hydraulically controlled, spring suspension. | |
| Diameter (mm) | 180 | |
| item | Name | Quantity | remark |
| 1 | Fire hose | 2 | One For adding the water, the other for sewage |
| 2 | High pressure nozzle | 1 | For high pressure cleaning gun |
| 3 | Fire wrench | 1 | For removing fire hydrant |
| 4 | Manual hydraulic pump rocker | 1 | Hydraulic pump for manual start |
| 5 | Spare tire | 1 |
| item | Name | Quantity | remark |
| 1 | Bristles | 72 | |
| 2 | Fan seal | 1 | |
| 3 | Back door sealing strip | 1 | |
| 4 | Vacuum tube seal | 2 |
| item | Name | Model | Country |
| 1 | Hydraulic valve | SWH-G02-C4-D2H | taiwan |
| 2 | High pressure pump | PF36 | German PINFL |
| 3 | Automatic unloading valve | VB200/150 | German PINFL |
| 4 | Relief valve | VS200-180 | German PINFL |
| 5 | Rotary Switches | Japan | |
| 6 | Recovery tank sensor | America | |
| 7 | Electric control box controller | German STW |
Founded in early 2022, Zhenbang New Energy takes pride in developing new energy technology and applies it to Special Purpose Vehicle industry.
The company has a strong technical team with 20 plus technical professionals and more than 200 employees. It owns a full-set of industrial facilities, including R&D center, warehousing&logistics station and a large workshop occupying more than 20,000 square meters, and is equipped with more than 100 sets of large and medium-sized machinery and equipment, such as large pressing/forming machine, laser cutting machine, welding robot, bending machine, punching machine, dioxygen welding machine.
Our main products are photovoltaic dual-use new energy sweeper, garbage collecting truck, fire truck, floor scrubber, golf cart, sightseeing shuttle bus, forklift, scissor lift etc. Our products are widely used in municipal sanitation, factory, workshop, school, real estate, airport, train station, bus station, exhibition hall for dust-cleaning, recycling garbage recycling, fire fighting, epidemic prevention and disinfection, nucleic acid testing and application in other fields. Except domestic market, we export to South Korea, Japan, Southeast Asia and other countries and regions. We are recognized and praised by domestic and foreign customers for our products are intelligent and environment friendly, energy saving and efficient, and most importantly, quality assured.
ZB New Energy will together work with you-our customers-to create a better future, guided by the enterprise's spirit- "Aim high and make the nation prosperous" and its development philosophy- "Develop green new energy and make our sky bluer, water cleaner".
We provide life-cycle service for each and every of our product and ship repair parts to customers worldwide immediately upon request.
The warranty is 12 months from the delivery date.
Q1. Are you a manufacturer or a trading company?
A: We are factory located in Hebei province, China and we have a professional foreign trade team at your service around the clock.
Q2. Can I order a sample to check your quality?
A: Yes for sure. Our MOQ is 1 piece and we charge only a little more than production price.
Q3. How long can I expect to get the sample?
A: If we have stock, we can ship out within 5 business days after receipt of your full payment. If we are out of stock, the production takes about 20 days.
Q4. Can you do OEM and ODM for us?
A: Yes we accept BOTH. We have a professional designer team who can translate your ideas into perfect design. Contact us for more details NOW.
Q5. How long is your production time?
A: Generally for Non-OEM orders, our lead time is 20-25 days and 35-45 days for OEM orders.
Q6. What is your warranty?
A: We provide lifetime guarantee for our products and the warranty is 12 months. During warranty period, we provide repair parts free of charge and online instructions by video-call. If your problem can not be solved, we will send engineer over to your destination.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}